High Performance Protective Coating For General Use

Epoxy Flow GEN

A clear general use 100% solids epoxy. This two-part, 2:1 standard formula is an excellent go-to epoxy for many systems’ base and broadcast coats when NO special considerations are present, such as moisture tolerance, cure time, or viscosity. GEN epoxy is suitable in coating systems approved for industrial, commercial, and residential settings.

Moderate to low viscosity, great leveling properties
Excellent clarity
Can accept compatible pigments
Can be used as primer, aggregate, and high-build coats
Moisture vapor emission tolerance of 10 lbs

Engineered for Performance

Designed for base coats, high-build applications, and primers, Epoxy Flow GEN delivers dependable coverage, extended work time, and a high-gloss finish. Its 100% solids epoxy formula ensures lasting durability and low VOC content, making it ideal for installers who need consistent results across industrial, commercial, and residential projects.

100% solids epoxy, extended work time

50–60 minutes working time with a 40–60 minute pot life (1 gal), giving you room to place and backroll.

Excellent adhesion

Bonds to properly prepared concrete and epoxy coats (adhesion >400 psi) for confident installs.

High-gloss clarity

Excellent gloss retention (≈60 GU) for clean, clear base and build coats.

Low odor & VOC-compliant

<5 g/L VOC. Suitable for interior projects where air quality matters.

High-build, self-leveling consistency

Moderate–low viscosity levels smoothly; use as primer, base, or high-build coat.

Durable, chemical-resistant performance

Strong mechanicals (compressive ≈7,500 psi; tensile ≈10,000 psi) and moisture/chemical resistance.

Technical Data

Mix Ratio

2:1 (A:B) by volume

Coverage Rate

~80–100 sq. ft./gal (high-build coat)
~130 sq. ft./gal (base coat)
~180 sq. ft./gal (primer / thin-mil)
3-gal kit yields: ~240–300 / ~390 / ~540 sq. ft. respectively

Work Time

~50–60 minutes (reduces with higher mass/temperature; pot life 40–60 min @ 1 gal)

Recoat Window

12–14 hours (abrade if exceeded)

Foot Traffic / Sanding Window

Light foot traffic: 12–18 hours; Full cure: ~5–7 days (temperature & humidity dependent)

Finish

High-gloss (excellent gloss retention); Gloss Index ~60 GU

Solids by Volume

100% solids epoxy

VOC Content

<5 g/L

Recommended Film Thickness

Varies by system; use spread rates above (primer / base / high-build)

Application Temperature

Recommended 60°F–85°F; Minimum surface temp 50°F

Cure Type

Two-component epoxy (100% solids)