Epoxy Flow LV

Matrix Products

A clear 100% solids low-viscocity epoxy designed for use with metallic pigment applications, as well as other epoxy applications requiring additional working time. This two-part formula is an excellent option when NO special considerations are present. LV epoxy is suitable in coating systems approved for industrial, commercial, and residential settings.

100% Solid Epoxy Resin
Low Viscosity
16-24 Hour Cure Time
Excellent Gloss Retention

Engineered for Precision

Formulated for metallics, base coats, and thin-mil primers, Epoxy Flow LV offers a low-viscosity blend that self-levels smoothly and bonds with strength. With excellent gloss retention and <5 g/L VOC content, this versatile epoxy gives installers precise control and reliable performance, even in demanding environments.

100% solids, slow-cure formula

Up to 40-minute work time ensuring you have the time to achive the best results.

Excellent adhesion

To epoxy base coats and concrete allowing you to lay floors with confidence!

UV-stable clarity

Ideal for white and light metallic systems, Poly Flow 100X makes your color pop!

Low odor & VOC-compliant

Perfect for interior or exterior projects and extended work times.

High-build, self-leveling consistency

Ensuring your floors are perfectly level and smooth, each and every time.

Exceptional chemical and abrasion resistancee

It's simple, our floors just stick period!

Technical Data

Mix Ratio

2:1 (A:B) by volume

Coverage Rate

33–45 sq. ft./gal (metallic / high-build coat)
100–130 sq. ft./gal (base coat)
150–180 sq. ft./gal (primer / thin-mil)
3-gal kit yields ~100–135 / ~240–390 / ~450–540 sq. ft., respectively

Work Time

50–60 minutes (pot life 30–45 min @ 1 gal; reduced with higher mass/temperature)

Recoat Window

12–14 hours (abrade if exceeded)

Foot Traffic / Sanding Window

Light foot traffic 12–18 hours; full cure ~5–7 days (temp & humidity dependent)

Finish

High-gloss; excellent gloss retention (Gloss Index ~60 GU)

Solids by Volume

100% solids epoxy

VOC Content

<5 g/L

Recommended Film Thickness

Varies by system; follow coverage rates above (primer / base / metallic)

Application Temperature

60°F–85°F recommended; minimum surface 50°F

Cure Type

Two-component, low-viscosity 100% solids epoxy

We do not compromise quality for money.

We are Matrix Products, the only epoxy product company independently developed from results we’ve tested and proven ourselves. With over 20 years experience in the epoxy flooring world, we’ve found and developed a product that we truly stand behind. With unparalleled adhesion, and consistent performance.